跳至主要内容

BTMA--What are the top four misconceptions about crushers?




We should read all instructions before purchasing equipment. Also, be familiar with how to use the crusher to prevent damage. There are four common misunderstandings when using crushers.

One: Don't ignore the importance of cleaning up. There are things inside the machine

Before the crusher begins to work, make sure you check if there are any iron or ore in the crushing chamber. Under load, the crusher cannot be started. Under load can cause electric trips and damage to machine parts. Before driving, make sure to inspect the crushing cavity. Before you can start, remove any iron or ore.

Two: Use an unqualified power supply

Do not use an unqualified power supply. To avoid any unnecessary danger, a soft break must be treated immediately.

Three: Work without personal protective equipment

Broken things can cause noise and pollution. For a long period, this can cause severe damage to the body. To reduce the damage caused by the crusher, please wear personal protective equipment.

Four: Use only without maintenance

The crusher needs to be maintained. The crusher will suffer unnecessary wear and tear from long-term usage. To make your machine more efficient, you should regularly check its wear and maintenance. .

标签：

评论

发表评论

此博客中的热门博文

BTMA--Choosing a counterattack crusher manufacturer

The impact crusher is a machine that crushes the material by squeezing the material between the rotor and the hammer. It has a large feed inlet and conveys materials through a high-speed rotating rotor. When the plate hammer rotates, it will hit the materials in the crushing cavity and throw them upward into the impact plate. As a result, the material is crushed and then thrown out of the crushing chamber. The final particle size can be adjusted by adjusting the distance between the rotor and the impact frame. To determine which impact crusher is best for a given application, consider the following: material to be crushed, electric drive, pre-screening before the crusher, overload system, pan feeder under the crusher, and service And operator friendly. Finally, choose an impact crusher with the correct size and specifications. When purchasing an impact crusher, please consider the flow of materials through the machine. It is very important to choose the right size impact crusher manu...
3 条评论
阅读全文

BTMA--How does the jaw crusher work?

Jaw crusher is a commonly used industrial machine for crushing rocks and ore. Its main purpose is primary crushing. It has a wide range of applications, including mining, construction materials, metallurgy, electric power, and transportation. One of the characteristics of the jaw crusher is that it is relatively simple to operate and extremely versatile. The most important details about the jaw crusher are listed below: 1. How does the jaw crusher work? The main feature of the jaw crusher is the opening and the discharge port. The size of the opening determines how much material it can handle. For primary and secondary types, the gap is usually 1/3 to 1/8 of the feed size. The size of the jaw crusher depends on how big rocks it can handle and how much TPH it can produce. To determine a suitable jaw crusher, please consider its maximum stone and TPH tonnage rate. The opening of the jaw crusher is described in terms of its CSS or closed side setting. OSS is the distance between the o...
2 条评论
阅读全文

BTMA--Can the crusher handle wet materials

The crusher converts the fruit tree pruning waste branches into biomass fuel. This allows for recycling and protection of the environment. Many people ask if this equipment can handle wet materials. The crusher's performance is affected by the moisture content. Different crushers have different requirements regarding the moisture content. A higher moisture content can hinder the process of materials. Below 6% moisture level will have a good effect on the processing. This has a huge impact on crusher work and can also have a significant impact on equipment output and performance. Normal circumstances will result in the wood being fibrous when it is wet and hit with the hammer. If there are fibers, this will impact the performance of the hammer when processing. This crusher is effective. This will result in a lower efficiency. The output of the work will therefore be lower. The fiber in the middle of dry wood will be less than that of dry wood. Therefore, if the hammer or the blad...
发表评论
阅读全文